Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at

1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the detachable front panel if it is attached to the chassis by pushing the “Release” button. Slide the mount- ing sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough,carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the open- ing or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary. CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from

the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully unsnap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION:DONOTEXCEEDM5X8MMMAXIMUMSCREWSIZE. LONGERSCREWSMAYTOUCHANDDAMAGE COMPONENTSINSIDETHECHASSIS.

4.Wire the new radio to the vehicle as per step 4 of the Universal Installation Procedure.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

ACD-28 specifications

The Audiovox ACD-28 is a remarkable addition to the realm of portable audio devices, combining advanced technology with user-friendly features to deliver a superior listening experience. This compact and stylish CD player goes beyond just playing music; it encompasses a variety of functionalities that appeal to a diverse audience, from casual listeners to audiophiles.

One of the standout features of the Audiovox ACD-28 is its ability to play not just standard audio CDs but also CDs encoded with MP3 files. This flexibility allows users to enjoy a larger selection of music without the need for multiple discs. The unit's playback capabilities extend to CD-R and CD-RW formats, making it an ideal choice for those who enjoy creating custom mixes or playlists.

The ACD-28 is equipped with a vivid LCD display that provides clear information about the track currently playing, including title, artist, and elapsed time. This feature enhances the overall user experience, especially during lengthy listening sessions. Additionally, the player boasts an intuitive control interface, allowing for quick and easy navigation through tracks and folders.

In terms of sound quality, the Audiovox ACD-28 does not disappoint. It incorporates advanced digital signal processing technology that ensures crisp, clear audio reproduction. With a powerful built-in amplifier, the device delivers rich bass and dynamic range, allowing users to fully appreciate their music. The headphone output also supports a range of audio devices, enhancing the versatility of this portable unit.

Battery life is another critical aspect where the ACD-28 shines. With long-lasting battery performance, users can enjoy hours of continuous play without the hassle of frequent recharging. The device can also be connected to an AC power adapter for extended use at home, offering additional convenience.

Portability is a key characteristic of the ACD-28, and its lightweight design makes it easy to carry wherever you go. Whether at home, in the car, or on vacation, this player is designed to fit seamlessly into your lifestyle.

In conclusion, the Audiovox ACD-28 stands out in a competitive market with its blend of versatility, sound quality, and user-oriented features. Its ability to handle various audio formats, coupled with extended battery life and portable design, makes it a worthy investment for anyone looking to enjoy their music with style and convenience.