CONTROLS/ERROR Codes

en DISC/TRACK SHUFFLE PLAY SELECTOR

When the SHUFFLE button is pressed, the SHF indication will appear on the display panel and the tracks on the disc will be played in a random, shuffled order. The Track Select button will also select tracks in the shuffled order instead of the normal progression.

When the RND button is pressed and held for 2 seconds, the DSF, disc number and track number indications will appear on the display panel and the discs in the magazine will be played in a random, shuffled order, as well as the tracks on each disc. After playing all tracks selected at random from a disc in the magazine, the unit will select another disc at random and play all the tracks on it in a random shuffled order. This will continue from disc-to-disc until the Shuffle Disc mode is deactivated by pressing the SHUFFLE button again, or activating the Scan or Repeat Play functions.

CD CHANGER

CD CHANGER ERROR CODES

If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.

ER-1:Indicates that there is no magazine loaded in the CD changer.

ER-2:Indicates a problem with the magazine eject function.

ER-3:Indicates an error in the disc loading function.

ER-4:Indicates an error in the disc unloading function.

ER-5:Indicates an error in the magazine position.

ER-6:Indicates an error in the laser pick-up position.

ER-7:Indicates an error in the laser focus on the disc.

In any of these error situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual of the CD changer). Re-load the magazine and check for proper operation. You may also try activating the RESET button dp on the unit, but this will also erase the time and pre-set memories. If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.