![](/images/new-backgrounds/1242982/24298211x1.webp)
OPERATING INSTRUCTIONS
3, 4, 5, 6, 7 |
|
|
| 17, 28, 29 |
|
|
| ||
2 | 14 |
| (BEHIND PANEL) | 15 | 26 27 | 30 | |||
|
|
|
|
|
|
|
|
| 8 |
9 |
|
| EQ |
|
|
|
|
| 25 |
| ROCK |
|
|
| TRACK |
|
| ||
| CLAS |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
| POP |
| RND | SCAN | RPT |
|
|
|
|
|
|
|
|
|
|
|
| 11 |
10, 18, 19, 34, 35 | 31 | 20 | 21 | 22 | 23 | 24 | 12 | 16 | 1 |
|
|
| 36 | 37 | 38 | 33 |
| 32 |
|
|
|
|
| 13 |
|
|
|
|
|
5
1
2AUDIO CONTROL UP/DN KNOB
To increase the volume level, turn the knob clockwise in the UP direction. The volume will increase and the level will be shown on the display panel from a minimum of VOL 00 to a maximum of VOL 39. To decrease the volume level, turn the knob counter- clockwise in the DN direction. The dis- play will automatically return to the normal indication 5 seconds after the last volume adjustment or when another function is ac- tivated. This control knob is also used in conjunction with the AUDIO SELECT (SEL) button 3 to adjust the bass, treble, bal- ance and fader levels as described in 4, 5, 6 and 7.
3AUDIO SELECT (SEL) CONTROL BUTTON
This button is used to select the audio function (volume, bass, treble, balance, or fade) whose setting is adjusted using the AUDIO CONTROL knob 2. Pressing the SEL button once will set the unit for bass adjustment (BAS will appear on the display panel) and an audible beep will occur. Pressing the button additional times will select treble adjustment (TRE on the display), balance (BAL), or fader (FAD), each accompanied by a beep tone. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
NOTE: Bass and Treble cannot be adjusted while the Equalizer function cu is in ROCK, CLAS or POP mode.
4BASS CONTROL
To adjust the bass level (equalizer function inactive), first select the Bass mode by pressing the SEL button 3 so the BAS