Installation and Connections, Precautions

Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

16-EN

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

∙Be sure to disconnect the cable from the (–) battery post before installing your CDM-7871. This will reduce any chance of damage to the unit in case of a short-circuit.

∙Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

∙When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDM- 7871 to the fuse box, make sure the fuse for the intended circuit of the CDM-7871 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

∙The CDM-7871 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

∙Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

CDM-7871 specifications

The Alpine CDM-7871 is a car audio receiver that has gained a reputation for its impressive sound quality and innovative features. This CD receiver is crafted to cater to the demanding needs of audiophiles and everyday listeners alike, making it a popular choice among car enthusiasts who seek a premium listening experience on the road.

One of the standout features of the CDM-7871 is its high-power amplification system, which delivers a clean and robust output. With a peak power of 50 watts per channel, it significantly enhances the audio experience by allowing users to enjoy their favorite music at high volumes without distortion. This feature pairs well with the receiver's compatibility with multiple audio formats, including CDs, MP3, WMA, and AAC, ensuring versatility in playback options.

The CDM-7871 also boasts a user-friendly interface, highlighted by a bright and easily readable display. The receiver includes customizable RGB illumination, allowing users to match the unit's lighting to their vehicle's interior. The ergonomic controls and intuitive layout make navigating through various functions seamless, whether it's adjusting volume, changing tracks, or switching between sources.

In terms of connectivity, the CDM-7871 supports Bluetooth technology for hands-free calling and wireless audio streaming. This allows users to connect their smartphones effortlessly, making calls and enjoying music without the hassle of cables. Additionally, the USB input offers direct access to music stored on compatible devices, ensuring quick and easy playback.

Another defining characteristic of the CDM-7871 is its capability for sound customization. The built-in equalizer allows users to tweak audio settings, enabling them to enhance bass, treble, and midrange frequencies according to their personal preferences. Furthermore, the inclusion of high-pass and low-pass filters helps improve sound clarity and maintain optimal performance for individual speakers and subwoofers.

Moreover, the Alpine CDM-7871 is equipped with a robust radio tuner, providing access to AM, FM, and even HD Radio stations. The digital tuner ensures more reliable reception with enhanced sound quality and clarity, ensuring that users can enjoy their favorite radio stations without interruptions.

Overall, the Alpine CDM-7871 stands out due to its combination of superior sound quality, user-friendly features, and versatile connectivity. Whether commuting or embarking on a road trip, this receiver enhances the in-car audio experience, making it a worthy investment for anyone looking to upgrade their vehicle's sound system.