26
Menu Options/Direct Tune
NOTE: To prevent distortion caused by overdriving the audio playback device input, it is recommended that you adjust the audio output level at
Direct Tune
The direct tune menu option, when on or active, allows you to select and play a desired channel without having to press the Select button. In the off state, direct tune is disabled; in this mode, to select and play a channel, the Select button must be pressed to confirm and play the desired channel. Otherwise, the receiver will revert to the currently active channel.
Direct Tune On/Off Enable: Upon entering this menu option, the direct tune screen appears as shown in Figure 19, with Direct Tune On highlighted. The screen prompts you to rotate the scroll wheel or press the channel up/down buttons on the remote control to activate or deactivate the direct tune mode. Once the desired state is achieved, press the Select button.
ROTATE DIAL TO CHANGE
Direct Tune On