Audiovox P-975 Co Repeat Play Selector RPT, Cp Random Play Selector RND, Ct Equalizer Button PlEQ

DISC EJECT (EJECT)

co REPEAT PLAY SELECTOR (RPT)

During disc play, press this button to repeat the play of the se- lected track (RPT will appear on the display panel). Play of the track will continue to repeat until the button is pressed again and the RPT indication disappears from the display panel. Repeat Play mode will also be canceled by activating the Track Scan cn or Random Play cp functions.

cp RANDOM PLAY SELECTOR (RND)

During disc play, press this button to play the tracks on the disc in a random shuffled order (RND will appear on the display panel). In Random Play mode, the TRACK Select function bu will also select tracks in the random order instead of the normal progression. The Random Play mode can be canceled by pressing the button again (RND indication will disap- pear from the display panel) or by activating the Repeat Play co or Track Scan cn functions.

cq DISC SELECT UP/DOWN (D.UP/D.DN)

These buttons are used to select the desired disc for play during changer operation. To advance to a higher number disc, press the D.UP button, and to return to a lower number disc, press the D.DN button. The num-

ber of the disc in play will be shown on the display panel.

cr

Disc play is stopped and the disc is ejected when the EJECT but- ton is pressed. It is necessary to first lower the panel (Front Panel Control) 2 before ejecting the disc. Radio or CD changer operation will automatically resume depending on which mode was in operation prior to disc play. If the disc is not removed from the unit within 15 seconds of being ejected, it will automati- cally be re-loaded into the unit to prevent it from being accidentally damaged ( will appear on the display panel to indicate that a disc is loaded in the player). Play of the disc can be resumed by using the MODE button bs to choose CD player function.

cs TIME/FREQUENCY SELECTOR (T/F)

During radio operation, press this button to call the time display on the incorporated quartz clock. The current time will appear to- gether with an AM or PM indication. The display will return to the radio frequency indication after 5 seconds.

During CD player operation, press this button to call the time dis- play. During CD changer operation the pressing the button will call the time display. In either case, the display will return to the disc indication after 5 seconds.

ct EQUALIZER BUTTON (PlEQ)

The Pl EQ button applies preset sound effects to the unit’s audio output signal. The Pl EQ button, when pressed, will activate one of three operating modes (ROCK, CLAS, or POP). When the Pl EQ function is active, as displayed on the panel, the bass and treble levels cannot be changed. When the PlEQ function is not active, the unit returns to the user set bass and treble levels.

cu RESET BUTTON

The RESET button is located on the front panel. The reset circuitry should only be activated under the following circumstances as it will erase the time and pre-set memories:

1.Upon initial installation after all wiring is completed.

2.If there is a malfunction of any of the switches on the unit, pressing the RESET button may clear the system and return to normal operation.

dlREMOTE SENSOR

The sensor to detect the infrared signal from the wireless remote control is located behind the VFD display lens. For optimum op- eration of the remote control, always aim the control at the VFD display.

-7-