When connecting DVD CHANGER directly with Head Unit
1.Insert the disc into the magazine and then install the magazine into DVD Changer. The DVD Changer will check the disc in the magazine.
2.Turn on the monitor and change the switch.
3.Turn on the car stereo and press DVD Changer mode and the button of the car stereo
to switch to DVD Changer. The initial screen will display DISC CHECK enabled. When disc checking is complete, the number 1 disc will be played.
When you press DISC UP/ DN ( , )ENTER button during disc checking, disc checking will be stopped to play the disc you have designated.
4.Adjust the audio(volume, balance, tone, etc.,) by using the car stereo control buttons. And adjust the video (shade, contrast, tone, etc.,) by using the monitor controls.
Note.
When you insert the magazine, the DVD Changer will check the discs in each tray to set the disc list. When DISK BEING CHECKED appears it means that a disc list is being set.
If you want to play a disc without waiting for disc list setting, press DISC UP/DN( , ) ENTER button.
When using a DVD, the title menu screen or DVD menu screen will display depending on the disc type. In case of video CD, the PBC menu screen will be displayed.
The playback information displayed differs depending on types of discs (DVD/video CD/audio CD/MP3).
The power source for DVD Changer can be turned on/off using the car stereo controls. When using a remote control optical receiver, do not use the power button of on the remote control.
The displays of car stereo may not match the ones controlled by remote control. (Namely, if the switcher is set to repeat mode, it will not be shown on the display of car stereo.)
Please refer to the manuals for car stereo and monitor.
6