Audiovox MM801 manual Installation

MM801

Guide

Dome

Light

Red: +12VDC Accessory Ckt. (Install 5A

Inline Fuse) Power Harness item #5

Black: Ground

Power

Connector 4 Pin

1

			Video Output
Accessory			Audio Output
Harness			forFM Mod.
item #7
Red RCA (Audio Right)
	White RCA (Audio Left)
		Yellow RCA (Video)

IR LED:

Clean the IR Receiver Window on the front of the VCP. Remove Adhesive Backing and Apply IR LED to IR Window on the Face of the VCP.

FUSE

DC IN

“Y” Adapter for use with Non-Stereo Installations

ANT.IN

RF OUT

OUT

Installation

1)Insert the Circular Mini-Din Connector of the source Component Harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the main PCB.

2)Pull the wire tie loop tight and cut off the excess.

3)Connect the Power Harness to the mating connector on the Video Monitor.

4)Connect the power harness to the vehicle’s electrical system through an In-Line 5-Ampere fuse by tapping into an accessory hot line.

5)Verify all functions of the System before final mounting of the finished assembly.

8