Audiovox VOH702 manual External Auxiliary A/V Stereo Inputs Aux Video, Optional Accessories

External Auxiliary A/V Stereo Inputs (Aux

Video 2)

These inputs are provided to facilitate the temporary connection of optional audio/video equipment, such as a camcorder or video game system. To play a source with these inputs, an RCA patch cord is required to connect the audio / video signals to their respective jacks. Mono audio sources will require the use of an RCA Y-cable (P/N 0892165) to connect to both right and left inputs, if patch cords are installed into the AUX inputs, the AUX INPUT 2 will be temporarily bypassed. Once the connections have been made, turn the VOH702 on and press the source button on the VOH702 or the TV / Video button on the remote control until “Video 2” is displayed on the screen. The unit will now play the audio and video signals from the accessory connected. The remote control will not operate the accessory components.

VOH702 Jack Panel

OPTIONAL ACCESSORIES

Wired Headphones

There are two 1/8” headphone jacks on the VOH702 that can be used with any standard stereo headphones. These jacks are controlled by the volume up/down buttons on the VOH702 or the remote control.

Wireless Headphones

The VOH702 includes a RF transmitter

(P/N WTXRF01) for use with optional Audiovox wireless headphones. Tuning the headphone switch on, and wearing them activates the internal micro switch, (which includes a tuning knob to tune into the preset frequency on the RF transmitter), which will activate the internal RF receiver and the volume can be adjusted separately with the controls on the headset. See the documentation accompanying your Audiovox wireless headphones.

-11-