WIRED COMMANDER OPERATION
1LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel will illuminate when the CD changer is operating. The disc number, track number and elapsed time or Disc ID name (if programmed) will appear as well as the function in use as explained in the applicable function description in this section.
2PLAY/PAUSE SELECTOR ( 
/ 
)
Pressing this button turns on the CD changer, illuminates the display panel and begins play of the first disc if a new magazine has been loaded into the changer. If a magazine was already in the changer, play will resume from the point on the track of the disc previously in play.
Pressing the button again will temporarily stop play of the disc and the “PAUSE” indication will appear on the display panel. Press the button again to resume play of the disc from the point at which it was stopped.
3POWER OFF SWITCH (OFF)
Press this button to turn the CD changer off and return to normal FM radio reception.
4DISC SELECT ( - DISC + )
This button is used to select the desired disc for play. To advance to a higher number disc, press the “+” side of the button. To return to a lower number disc, press the
5TRACK SELECT ( 
TRACK 
)
This button is used to quickly select the beginning of a particular track. With each momentary tap of the Forward Track Select side of the button
(
), the next higher track number will be selected as shown on the display panel. Similarly, with each momentary tap of the Backward Track
Select side of the button ( 
), the next lower track number will be selected.
6CUE/REVIEW FUNCTIONS
(
) to advance rapidly in the forward direction or the Review side of
the button ( 
) to advance rapidly in the backward direction. During either function, the elapsed time within each track will automatically be shown on the display panel.
7TRACK/DISC REPEAT (RPT)
When the Repeat button is pressed, the “RPT” indication will appear on the display panel and play of the selected track will be continually repeated until the Track Repeat mode is cancelled by pressing the Repeat button again (“RPT” will disappear from the display panel).
When the Repeat button is pressed and held longer than 2 seconds, the DISC and “RPT” indications will appear on the display panel and play of the selected disc will be continually repeated. The Disc Repeat mode can be cancelled by pressing the Repeat button again ( DISC and “RPT” will disappear from the display panel).
When the Shuffle button 8 is pressed during Disc Repeat mode, the
3