Installing The Snap On Covers
1. | 2. | 3. | 4. |
Housing | Snap On Cover | Snap On Cover | Pry Tool |
| (Shroud) | (Screen Back Cab) |
|
| 1 Pewter, 1 Shale | 1 Pewter, 1 Shale |
|
Place the pod on a soft surface to avoid damaging the plastic.
Installing The Shroud
catch | catch |
(A) |
|
Begin by hooking area “A” (above) over the dome light and slide the cover over the pod. The cover will snap in place.
Installing The Screen Cover
(B)(B)
Open the screen and hook the two tabs “B” on the bottom edge of the screen. Snap the opposite side over the hinge
2