Audiovox AVD400TA owner manual Front, Connections

F. Connections

AVD400TA DVDPLAYER

DOLBY

Front

DOLBY FC

1

Rear

(GND) Black (ACC) Red

Yellow Video Input (to DVD Player) Red Audio In

White Audio In

TV Antenna

Yellow Video Out

Red Audio Out

White Audio Out

Figure 3

1.Powering your DVD Player ( Refer to Figure 3)

Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the back of the unit.

2.Remote IR Receiver ( Refer to Figure 3)

Plug the 1/8” plug on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location.

3.Connecting to a Monitor ( Refer to Figure 3)

a.Match the color-coded plugs to the appropriate jacks on the back of the DVD Player A/V OUTPUT jacks: Yellow (video) to Yellow, White (left audio) to White, and Red (right audio) to Red.

8