Front Button Panel Features

1)Power: This button turns LCM1331FD/LCM1331FDW on and off. Dimly lit when in stand-by mode.

2)Channel Δ ∇: Pressing Δ will select higher programmed channels and pressing ∇ will select lower programmed channels than current channel.

3)Volume Δ ∇: Pressing Δ will raise the volume and pressing ∇ will lower the volume.

4)Select: Each press of this button selects the next source (1-3). Note that some sources produce an image, depending upon whether components are connected to all sources.

5)Latch: Sliding this latch forward will release the 12.1” monitor to drop into playing position.

6)AP: Places the tuner in auto-program mode. Auto program will scan all channels available and store active channels into memory for easy selection with the channel up/down buttons.

7)Bright Δ ∇: Pressing this button Δ will increase monitor brightness, and pressing this button ∇ will decrease monitor brightness.

8)Contrast Δ ∇: Pressing this button Δ will increase picture contrast, and pressing this button ∇ will decrease contrast.

9)Color Δ ∇: Pressing this button Δ will increase color separation and pressing this button ∇ will decrease color separation.