AudioBahn ABD40J owner manual Disclaimer

Page 9

WARNING AND DISCLAIMER

8

TROUBLESHOOTING GUIDE

If the unit does not light up or the LED indicator light does nothing check the following:

1)Check to make sure the +B and GND are not reversed.

2)Check that all cables are connected properly and have adequate power (11-16 volts).

3)Check that the fuse is intact.

If you experience high or low volume audible distortion output:

4)Check that the input and output levels are set correctly.

5)Check the crossover, make sure it is correct. For systems of high “Q”, set 1 octave or down.

If you experience noise of the machine:

6)Verify that the GND connection is secure, the conductor (cable) is not too thin and unnecessarily long.

7)Check that the cable +B is not too thin and unnecessarily long.

8)Change the source for output.

Investigate the layout of your automobile thoroughly before drilling or cutting any holes. Take care when you work near gas tanks, gas lines, hydraulic lines, and electrical wiring. Do not use the power ampli- fier unmounted. Attach the system securely to the automobile to prevent damage, particularly in the event of an accident. Do not mount the system so that the wire connections are unprotected or are subject to pinching or damage from nearby objects.

The +12V DC power wire must be fused at the battery positive terminal connection. Before making or break- ing power connections at the system power terminals, disconnect the +12V wire at the battery end. Con- firm your radio/head unit and/or other equipment is turned off while connecting the input jacks and speaker terminals. If you need to replace the power fuse, replace it only with a fuse identical to that supplied with the system. Using a fuse of a different type or rating may result in damage to this system which is not covered by the warranty.

Disclaimer

Specifications are subject to change without notice. For the most updated Specifications call Audiobahn, your local Authorized Audiobahn Dealer,

or check the Audiobahn web site.

www.audiobahn.com

Image 9
Contents ABD40J Audiobahn Way Table of Contents Introduction Specifications Features and SpecificationsControls and Functions Controls and Functions AB D4 0 J InstallationDisclaimer Warranty Audiobahn Consumer Product Warranty PolicyContact Information Proud Sponsor

ABD40J specifications

The AudioBahn ABD40J is a high-performance subwoofer designed for audiophiles and car audio enthusiasts seeking unparalleled sound quality and robust bass response. Renowned for its powerful output and innovative engineering, the ABD40J is a testament to AudioBahn's commitment to delivering exceptional audio experiences.

One of the standout features of the ABD40J is its impressive power handling. With a peak power rating of 1,000 watts and an RMS rating of 500 watts, this subwoofer can deliver deep, booming bass that resonates throughout the vehicle. This capability allows it to handle a wide range of musical genres, from hip-hop to rock, making it a versatile addition to any audio setup.

The subwoofer's design incorporates a dual 4-ohm voice coil configuration, providing flexibility in wiring options. This feature allows users to configure the subwoofer for either a parallel or series connection, enabling customization to match the specifications of their amplifier and audio system. The dual voice coils enhance the overall performance and ensure efficient power distribution.

The ABD40J is also engineered with a durable and resilient structure. The subwoofer features a heavy-duty polypropylene cone that minimizes distortion and improves sound clarity. Additionally, the rubber surround enhances cone movement, providing more travel for powerful bass response and preventing damage during high-energy playback.

Furthermore, the innovative vented voice coil cooling system helps regulate temperature during intense use, allowing the subwoofer to maintain optimal performance without overheating. This technology extends the lifespan of the component, ensuring consistent sound quality over time.

In terms of aesthetics, the AudioBahn ABD40J does not fall short. Housed in a striking chrome casing, the subwoofer offers an eye-catching look that complements a high-end audio system. Additionally, the sleek design is suitable for various installation configurations, whether in a custom enclosure or a pre-made box.

Overall, the AudioBahn ABD40J stands out as an exceptional subwoofer that combines high power handling, innovative technologies, and durable construction. With its ability to deliver profound bass and clear sound, this subwoofer is an excellent choice for anyone looking to elevate their automotive audio experience to the next level.