G 4 0 0 0 A O P E R AT I O N M A N U A L
SHORTWAVE RADIO OPERATION continued
7 STORING STATIONS INTO MEMORY
MANUAL TUNING: Use the regular TUNING buttons to go up or down frequency. Be aware that when using manual tuning, it is possible to tune right out of the shortwave band you have entered. You are in the band as long as the band’s number, e.g. 25m, is in the display.
HOW TO CHOOSE THE BEST SHORTWAVE BAND TO TUNE AROUND IN
This information and much more can be found
in the section titled MORE INFORMATION ABOUT SHORTWAVE.
To store a station into memory, you must be tuned to that station. Then you must decide which of the 40 memories to store it into. Follow the easy steps outlined below.
HOW TO TELL WHICH MEMORIES ARE EMPTY
• To determine the next available memory, press |
the FREE button once. The memory number |
4.Immediately press the STORE button. If the display flashes, it means that a frequency is already stored into this memory. To overwrite it, immediately press STORE again. If you do not want to overwrite it, start over and use a different memory.
HOW TO ACCESS WHAT YOU HAVE STORED INTO MEMORY
SHORTWAVE BAND AUTO TUNING RANGES:
90m: | 22m: |
|
|
80m: | 20m: |
75m: | 19m: |
|
|
60m: | 17m: |
49m: | 16m: |
|
|
41m: | 15m: |
40m: | 13m: |
|
|
31m: | 12m: |
30m: | 11m: |
|
|
25m: | 10m: |
|
|
is shown in the lower right hand corner of the |
display. |
• To see all availably memories, press the FREE |
button repeatedly. The empty memory numbers |
are shown in the lower right corner of the display. |
HOW TO STORE A FREQUENCY INTO MEMORY
There are 40 memories. Here is a specific example. To store BBC’s evening frequency to North America,
5975 kilohertz, into memory 32, do the following:
1.Press 5975
2.Immediately press the FREQU./METER button
3.Press 3 2
1.To access one specific memory, e.g. memory 25, press 2 5 then press either MEMO button
2.To review all filled memories, press either MEMO button repeatedly.
3.To scan filled memories, press either MEMO button for about one second, and then release it. Scan starts. To stop scan, press any button.
HOW TO ERASE THE CONTENTS OF A MEMORY
Enter the memory’s number e.g. 2 5 , then press FREE twice.
12 | 13 |