Mazda 99-7509 installation instructions ISO Mount Radio Provision with Pocket

Page 6

ISO MOUNT RADIO PROVISION WITH POCKET

*Note: Refer also to the instructions included with the aftermarket radio.

1Mount the ISO Brackets to the after- market radio using the screws sup- plied with the radio. (Figure A)

2Slide the radio into the Radio Housing until it snaps into place. (Figure B)

3Snap the Trim Plate onto the front of the Radio Housing. (Figure C)

4Snap the pocket into the Radio Housing. (Figure D)

Continue to final assembly.

Image 6

Contents 99-7509 Dash Disassembly Mazda 5 Continue to kit assembly KIT Assembly DIN Radio Provision with PocketISO Mount Radio Provision with Pocket Double DIN/STACKED ISO Units Provision Figure BFinal Assembly 99-7509 99-7509 99-7509 Instructions