System connections (continued)
Make sure to unplug the AC power cord before making any connections.
AM loop antenna
Installing the AM loop antenna
< Assembling >
<Attaching to the wall >
wall screws (not supplied)
FM antenna 
Right speaker 
AC outlet (AC 120 V ~ 60 Hz)
TV
To video input jack
Video cable 
(not supplied)
Left
speaker
Red
Black
Remote control
Battery installation
Use 2 “AAA” size batteries
1Open the battery cover.
2Insert the batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them toward the
3Close the cover.
Caution:
●Replace all old batteries with new ones at the same time.
●Do not mix old and new batteries.
●Remove the batteries if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
●Do not use rechargeable batteries
●Installing the batteries incorrectly may cause the unit to malfunction.
●Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Notes concerning use:
●Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AAA” size batteries
●Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
●Keep the remote control away from moisture, heat, shock, and vibrations.