Sony EXR-400 Other Specifications Cassette player section, Tuner section, General

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION 8Ê watts per channel minimum continuous average power into

4Ê ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1% total harmonic distortion.

Other Specifications

Cassette player section

Tape track	4-track 2-channel stereo
Wow and flutter	0.08 % (WRMS)
Frequency response	30 – 18,000 Hz
Signal-to-noise ratio	58 dB

Tuner section

FM

Tuning range	87.5 – 107.9 MHz
Antenna terminal	External antenna connector
Intermediate frequency	10.7 MHz
Usable sensitivity	8 dBf
Selectivity	75 dB at 400 kHz
Signal-to-noise ratio	65 dB (stereo),
	68 dB (mono)
Harmonic distortion at 1 kHz
	0.5 % (stereo),
	0.3 % (mono)
Separation	35 dB at 1 kHz
Frequency response	30 – 15,000 Hz
Capture ratio	2 dB

AM

Tuning range	530 – 1,710 kHz
Antenna terminal	External antenna connector
Intermediate frequency	10.71 MHz/450 kHz
Sensitivity	30 µV

General

Outputs	Line out (1)
	Power antenna relay
	control lead
	Power amplifier control
	lead
Tone controls	Bass ±8 dB at 100 Hz
	Treble ±8 dB at 10 kHz
Power requirements	12 V DC car battery
	(negative ground)
Dimensions	Approx. 188 × 58 × 177 mm
		EN
	(7 1/2 × 2 3/8 × 7 in.)
	(w/h/d)
Mounting dimension	Approx. 182 × 53 × 155 mm
	(7 1/4 × 2 1/8 × 6 1/8 in.)
	(w/h/d)
Mass	Approx. 1.2 kg (2 lb. 10oz.)
Supplied accessories	Parts for installation and
	connections (1 set)
	Front panel case (1)
Optional accessories	Bus cable (supplied with
	an RCA pin cord)
	RC-61 (1 m), RC-62 (2 m)
	RCA pin cord
	RC-63 (1 m), RC-64 (2 m),
	RC-65 (5 m)
Optional equipment	Rotary commander
	RM-X2S
	Source selector XA-U20

Power amplifier section

Outputs	Speaker outputs
	(sure seal connectors)
Speaker impedance	4 – 8 ohms
Maximum power output	20 W × 4 (at 4 ohms)

Design and specifications are subject to change without notice.

13

Actual total number: Sony EXR-400 (E) 3-810-306-11(2)