Setting the Clock
The clock has a
For example, setting it to 10:08
1 Display the time.
(Press the DSPL button during unit operation.)
2 Press the DSPL button for more than two seconds.
The hour digit(s) blinks.
Set the hour digits.
– SEL +
(to go back) (to go forward)
3 Press the | SEL | button momentarily. |
The minute digits blink.
Set the minute digits.
– SEL +
(to go back) (to go forward)
Cassette Player
Operation
Listening to Tape Playback
After inserting the cassette, playback will start automatically.
To change the tape direction,
press both the 0and the ) buttons at the same time.
Indication of Tape Transport Direction
The side facing up is being played.
The side facing down is being played.
Tape playback automatically changes direction at the end of the tape.
Note
Before turning off the unit, eject the tape to avoid tape damage.
EN
Cassette Player Operation
Ejecting the Cassette
4 Press the DSPL button momentarily.
Press the 
button to stop playback and eject the cassette.
The clock activates.
Note
The clock cannot be set unless the power is turned on. Set the clock after you turn on the radio, or during tape playback.
5
Actual total number | Sony |