2Press (SEL) after locating the desired character.
The flashing cursor moves to the next space.
CD1
3Repeat steps 1 and 2 to enter the entire title.
3 To return to the normal CD playback mode, press (LIST) for two seconds.
To erase a title
You can erase a title by selecting eight “_”s
Displaying the disc memo
Press (DSPL) during CD playback.
|
| CD1 | SCHUBERT | ||||||
| Each time you press (DSPL) during CD | ||||||||
EN | |||||||||
playback, the displayed items changes as | |||||||||
| |||||||||
| follows: | ||||||||
|
| z | Elapsed playback time | z Disc title |
|
| |||
|
|
|
| ||||||
|
|
|
|
| Z |
| |||
|
|
|
| Clock | |||||
|
|
|
|
| |||||
Erasing the disc memo
1 Play the CD and press (LIST) for two seconds.
2 Press (5) while pressing (SEL).
3 Press (+) or (Ð) to select the title that you want to erase.
4 Press (SEL) for two seconds. The title is erased.
Repeat step 3 and 4 if you want erase other titles.
5 Press (LIST) for two seconds.
The unit returns to the normal CD playback mode.
Selecting the specific tracks for playback — Bank
(CD changer with custom file function)
If you label the disc, you can set the unit to skip tracks and play only the tracks you want.
1 Start playing the disc and press (LIST) for two seconds. Then press (LIST) momentarily.
CD1 DISC TRACK
Note
If you do not label the disc, you cannot use this function. For more information on “Labelling a CD”, refer to page 10.
2 Press either side of (SEEK/AMS) to select the track number you want to skip and press (SEL).
CD1 DISC TRACK
The indication changes from “PLAY” to “SKIP”. If you want to return to “PLAY”, press (SEL) again.
3 Repeat step 2 to set the “PLAY” to “SKIP” mode on all the tracks.
4 Press (LIST) for two seconds.
The unit returns to the normal CD playback mode.
Notes
•You can set the “SKIP” mode on up to 24 track.
•You cannot set the “SKIP” mode on all the tracks.
10
Actual total number: | Sony |
|
|