Sony XR-6859RDS Getting Started, Resetting the unit, Detaching the front panel

Page 4

Getting Started

Depending on the car, the “Resetting the unit” and “Detaching the front panel” procedures may not work.

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press the reset button with a pointed object, such as a ballpoint pen.

 

 

 

 

 

 

 

 

 

 

 

 

EN

 

Reset button

 

 

 

 

Note

Pressing the reset button will erase all the memorised stations.

Detaching the front panel

The front panel of this unit can be detached in order to prevent the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE) to open up the front panel, and detach the panel by pulling it towards you.

(RELEASE)

Notes

Be sure not to drop the panel when detaching it from the unit.

If you press (RELEASE) to detach the panel while the unit is still turned on, the power will be automatically turned off in order to protect the speakers from being damaged.

4

Attaching the front panel

Attach part A of the front panel to part B of the unit as illustrated and push until it clicks.

A

B

Notes

Make sure that the front panel is the right way up when attaching it to the unit as it cannot be attached upside down.

Do not press the front panel hard against the unit when attaching it to the unit. It can easily be attached by pressing it lightly against the unit.

When you carry the front panel with you, put it in the supplied front panel case.

Do not press hard or give excessive pressure to the display windows of the front panel.

Do not expose the front panel to direct sunlight, heat sources such as hot air ducts or leave it in a humid place. Never leave it on the dashboard etc. of a car parked in direct sunlight where there may be a considerable rise in temperature inside the car.

Caution alarm (Detachable front panel only)

If you turn the ignition key to the OFF position without removing the front panel, the caution alarm will beep for a few seconds.

Preparing the rotary remote

When you mount the rotary remote, attach the label in the illustration below.

SEL

DSPL

MODE

MODE

DSPL

SEL

Actual total number:

Sony XR-6859RDS (E) 3-858-436-11(1)

 

 

Image 4
Contents FM/MW/LW Actual total numberWelcome Table of contents Resetting the unit Getting StartedDetaching the front panel Preparing the rotary remoteSetting the clock Cassette PlayerListening to the tape Fast-winding the tapePlaying the tape in various modes Changing the displayed itemsSearching the desired track Intro scan Playing tracks repeatedly Repeat playReceiving the memorised stations RadioMemorising stations automatically Re-tuning the same programme automatically Overview of the RDSFunction Displaying the station nameTo cancel the current traffic announcement Presetting the volume of traffic announcementsListening to a regional programme Local link function United Kingdom onlyPresetting the RDS stations with the AF and TA data Presetting the same setting for all preset stationsPresetting different settings for each preset station Programme types DisplaySetting the clock automatically Using the rotary remoteOther Functions Adjusting the sound characteristics Changing the sound settingsMuting the sound CD Changer Playing a CDScanning the tracks Playing tracks repeatedlyPrecautions Additional InformationPlaying tracks in random To play the tracks in the current changer in a random orderMaintenance Cleaning the ConnectorsLoud loudness button Location of controlsBL.SKIP button Specifications Power amplifier sectionCassette player section Tuner sectionTroubleshooting guide Tape playbackRadio reception RDS functionsError displays with the optional CD changers connected ProblemCause/Solution Playback sound skipsDisplay Cause Solution Disc playIndex V, W, X, Y, Z