Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION 8Ê watts per channel minimum continuous average power into
4Ê ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1% total harmonic distortion.
Other Specifications
Cassette player section
Tape track | |
Wow and flutter | 0.08 % (WRMS) |
Frequency response | 30 – 18,000 Hz |
58 dB |
Tuner section
FM
Tuning range | 87.5 – 107.9 MHz |
Antenna terminal | External antenna connector |
Intermediate frequency | 10.7 MHz |
Usable sensitivity | 8 dBf |
Selectivity | 75 dB at 400 kHz |
65 dB (stereo), | |
| 68 dB (mono) |
Harmonic distortion at 1 kHz | |
| 0.5 % (stereo), |
| 0.3 % (mono) |
Separation | 35 dB at 1 kHz |
Frequency response | 30 – 15,000 Hz |
Capture ratio | 2 dB |
AM
Tuning range | 530 – 1,710 kHz |
Antenna terminal | External antenna connector |
Intermediate frequency | 10.71 MHz/450 kHz |
Sensitivity | 30 µV |
General
Outputs | Line out (1) |
| |
| Power antenna relay |
| |
| control lead |
| |
| Power amplifier control |
| |
| lead |
| |
Tone controls | Bass ±8 dB at 100 Hz |
| |
| Treble ±8 dB at 10 kHz |
| |
Power requirements | 12 V DC car battery |
| |
| (negative ground) |
| |
Dimensions | Approx. 188 × 58 × 177 mm |
| |
EN | |||
| (7 1/2 × 2 3/8 × 7 in.) | ||
| (w/h/d) |
| |
Mounting dimension | Approx. 182 × 53 × 155 mm |
| |
| (7 1/4 × 2 1/8 × 6 1/8 in.) |
| |
| (w/h/d) |
| |
Mass | Approx. 1.2 kg (2 ib. 10 oz.) |
| |
Supplied accessories | Parts for installation and |
| |
| connections (1 set) |
| |
| Front panel case (1) |
| |
Optional accessories | Bus cable (supplied with |
| |
| an RCA pin cord) |
| |
|
| ||
| RCA pin cord |
| |
|
| ||
|
| ||
Optional equipment | Rotary commander |
| |
|
| ||
| Source selector |
|
Power amplifier section
Outputs | Speaker outputs |
| (sure seal connectors) |
Speaker impedance | 4 – 8 ohms |
Maximum power output | 25 W × 4 (at 4 ohms) |
Design and specifications are subject to change without notice.
13
Actual total number: | Sony |
|
|