Read, view, and save a shortcut, To read a tag

language is selected as the phone language, the default language English is used for the application.

■Read, view, and save a shortcut

Touching a tag with the RFID reader launches a shortcut contained in the tag.

To read a tag:

1.Touch the tag with the RFID reader.

The phone flashes green lights on the sides of the cover and displays the shortcut defined in the tag. If the Service Discovery application is not on when reading a tag, the RFID shell recognises the presence of a tag and launches the application.

Note: If the tag contains no information the phone flashes the red

lights on the sides of the cover and gives an error message: No shortcut on tag, and prompts you to select a service shortcut to write to the empty tag: Please select shortcut to write. If the tag is empty and you don’t yet have any shortcuts stored in your phone’s memory, the phone prompts you to create a shortcut: Please create a shortcut for writing. If the empty tag is write-protected, the phone indicates this with the message: Tag is write protected.

2.Depending on the type of the shortcut, the phone either makes a phone call or sends an SMS to the predefined phone number, or connects to the predefined web site over a GPRS connection.

Before completing the function defined in the shortcut, the phone asks you for a confirmation. To confirm, press OK, to decline, press Cancel.