Sanyo SCP-2700 manual Speed Dialing, Abbreviated Dialing

Speed Dialing

You can store up to 98 numbers in your phone’s speed dial memory to make contacting friends and family easier.

You must assign a speed dial number to the existing phone number beforehand. See “Assigning Speed Dial Numbers” on page 55.

To use speed dial for locations 2-9:

▶From standby mode, press and hold the appropriate key for approximately two seconds.

To use speed dial for locations 10-99:

▶From standby mode, press appropriate keys, and then press .

The display confirms that the number has been dialed when it shows “Connecting...”

Note	Speed dialing may not be available when you are
	roaming; when you are roaming off the home network,
	you must always dial using eleven digits (1+ area code
	+ number).

Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated dialing features.

⬤Contacts Match – Retrieve any number saved in your Contacts by entering only the last three to six digits of the number.

⬤Prepend – Prepend the first five or six digits (for example, the area code and prefix) to any four or five digits you enter.

To activate the Contacts Match feature:

1.Press > Settings > More... > Call Setup.

2.Select Contacts Match > On.

To activate the Prepend feature:

1.Press > Settings > More... > Call Setup > Abbreviated Dialing.

2.Select Prepend > On.

3.Enter a five- or six-digit number and press .

22 2A. Phone Basics