Sanyo CLT-3602 Auto Answer, Paging, Dial Mode, Handsfree, BS Settings, Flash Signal, Menu Map

￿Auto Answer

Viewing the Phone book Entries

1. In the standby mode, press the key.

6. Use	or	key to select the ring you like to
associate with the number, press the MENU/R key to

Setting Date & Time

1. Date Format

1. Press the MENU/R key.

Feature List

With this feature, you can answer a call by			3. Use	or	key to choose AUTO ANSWER,
just picking up the handset from the base			then press the MENU/R key.
without pressing any key.
			4. Use	or	key to choose ON/OFF to
1. Press the MENU/R		key.	enable/ disable the function, then press the
2. Press	or	key repeatedly to choose	MENU/R	key, you will hear a confirm beep.

HS SETTING, press the MENU/R key.

￿Paging

You can page the handset from the base unit		To stop paging, press the		key on the base again
making it ring with a special tone. It's useful to		or any key on the handset.
locate a lost handset.
		Note:
Press the	key on the bottom of the base (less	On a long	key press, more than or equal to
than 5 seconds), all the handsets registered to		5 seconds,	the base	will enter subscription

the base will ring for about 60 seconds. mode. For details, see par. Registration.

￿Dial Mode

2. Press	or	key repeatedly until the desired
name is displayed.
3. Press the MENU/R		key to show the relevant number.

Dialing a Number from Phone book

Find out the number you want to dial. Refer to "Viewing the Phone book Entries". Then press the key to dial out the number.

Editing the Phone book Entries

1. Press the MENU/R			key.
2. Press the			key to choose PHONE BOOK,
	press the MENU/R		key.
3.	Press the		key to choose CHANGE ENTRY
	menu, press the MENU/R key.
4.	Press	or	key repeatedly until the entry
	you want to edit displays, press the MENU/R key to
	confirm.

confirm.

Deleting the Phone book Entries

1.Press the MENU/R key.

2.Press the key to choose PHONE BOOK, press the MENU/R key.

3.Press or key to choose DELETE ENTRY. Press the MENU/R key.

4.Press or key repeatedly until the name you want to delete displays, then press the MENU/R key. The display shows "CONFIRM ?". You can press the MENU/R key to delete it or press the C/

key to exit.

5.At step 3, if you choose DELETE ALL menu and press the MENU/R key, the display will show "CONFIRM ?". You can press the MENU/R key to delete all the entries or press the C/ key to exit.

PB Status

1.Press the MENU/R key.

2.Press or key repeatedly to choose HS SETTING menu, then press the MENU/R key.

3.Press or key to choose DATE & TIME, press the MENU/R key.

4.Press the MENU/R key to choose DATE FORM.

5.You can use or key to choose the Date format (DD-MM/MM-DD), press the MENU/R key to save.

2.Setting date & time

1. Press the MENU/R key.
2. Press	or	key repeatedly to choose HS
SETTING menu, then press the MENU/R key.
3. Press	or	key to choose DATE & TIME,
press the MENU/R key.

2. Press		or	key repeatedly to choose HS
	SETTING menu, then press the MENU/R key.
3.	Press	or	key to choose the SELECT BS,
	press the MENU/R		key.
4.	You can use		or	key to select the base
	you want, then press the MENU/R key. If you select
	a non-existent base, the handset will sound a
	warning tone.
5.	The display will show SELECT BS X. Press the
	MENU/R key	to	confirm. A	confirm tone will be

heard.

HS Reset

This function allows you to reset the handset settings to the factory default.

1. Press the MENU/R key.

1.8GHz DECT technology with GAP

Up to 5 handsets for optional for one base Up to 4 bases for optional for one handset Phonebook with up to 50 entries

9 VIP ring tones setting for phonebook entries

Redial book with up to 10 entries

10 ring tones and volume selectable (5 levels+off)

Key tone ON/OFF selectable Full handsfree speakerphone Internal call

Call transfer

3-way conference call

Receiver/Speaker volume adjustable (5 levels)

Mute

PIN protection Predialing

Redial, Flash, Pause

TONE/PULSE dialing mode selectable FLASH time selectable

Call duration display Real time clock (set time) Keypad lock

13 languages selectable

Auto answer ON/OFF selectable Alarm clock include snooze option Handset Name setting

LCD and keypad backlight

Caller ID

FSK and DTMF dual system Caller ID Caller ID list with up to 40 entries Incoming calls can be called back/added to phonebook/deleted

Note:

The caller ID feature is only available if you subscribe to a Caller Display service from your network provider.

You can select to change the dial mode by the			4. You can press	or	key to select the
following steps:			required dial mode options (TONE/PULSE) and
1. Press the MENU/R key.			press the MENU/R key. A confirm beep will be heard.
2. Press	or	key repeatedly to choose BS	Note:

5. If necessary,	press the C/ key to clear the
digit(s) then	enter the desired name and
number, press the MENU/R key to save.

The PB Status shows the number of phone book entries already stored. When the PB STATUS shows on the LCD, press the MENU/R key to enter it.

4.	Press	or	key to choose SET DATE or
	SET TIME menu, press the MENU/R key.
5.	Enter the current date or time by numeric
	keypad and press the MENU/R key to save and exit.

2.	Press	or	key repeatedly to choose HS
	SETTING menu, then press the MENU/R key.
3.	Press	or	key to choose the HS
	DEFAULT menu, press the MENU/R key. You will be
	prompted to enter the PIN code.

Troubleshooting

SETTING, and press the MENU/R key.		If you are not sure which dialing mode should
		be selected, please contact your local service
3. Press the	key to choose the DIAL MODE,	provider.
then press the MENU/R key.

￿Handsfree

D u r i n g a c a l l , y o u m a y t u r n o n t h e	To turn the feature off, and keep on talking in
speakerphone built in the handset. In this	normal mode, press the	key again. The
mode you can simply put your handset on a	icon will disappear.

￿BS Settings

Terminate HS

This function allows you to delete a handset registration from the base.

1. Press the MENU/R key.
2. Press	or	key repeatedly to choose BS
SETTING menu, then press the MENU/R key.

1. Press the MENU/R key.
2. Press		or	key repeatedly to choose BS
	SETTING menu, then press the MENU/R key.
3.	Use	or	key to choose MODIFY PIN
	menu, press the MENU/R key.
4.	The display shows "PIN?" to prompt you to

Note:

At step 5 you need to enter the time in 24- Hour format.

Selecting a Base

This function allows you to select a base from those already registered to the handset. You can access the options by scrolling the menu.

4. Enter the PIN code (the default one is 0000),

then press the MENU/R key. If the PIN code is

validated all handset settings will return to the

factory default, otherwise a warning tone will

be heard and the settings will remain.

Result: After resetting, the handset will return to standby mode.

Symptom	Check & Remedy
	Check that the power adapter is properly connected.
No operation	Check that the telephone line cord is properly connected.
	Check that the handset batteries in full power.
	Check that the handset batteries are installed properly.
No dial tone	Check that the telephone line cord is properly connected.
	Check that the power adapter is properly connected.
Nothing appears	Check that the handset batteries are installed properly.
	Check that the handset batteries in full power.
on the display
	Check that the handset is on.

surface (e.g. a desk) and enjoy the comfort

3. Press the MENU/R key again to choose TERMINATE

enter the old PIN. Enter it then press MENU/R key.

￿Registration

of the handsfree conversation.				Notes:
To turn	the feature	on, press the	key	Before putting the handset near your ears, be
				sure you have turned the speakerphone off.
during	a call (line	engaged). The	icon

HS. The display shows "PIN?" to prompt you

to enter the PIN Code (The default PIN Code is

"0000"). Then press the MENU/R key.

If the old PIN code is correct, you will be

prompted to enter a new PIN code, otherwise

a warning beep will sound and the handset will

The supplied handsets are already registered with the number 1 and 2. You can register up to 5

4. If the base is	found, you will be prompted to
enter the PIN	code (the default one is 0000).

Handset seems	Check the charge contacts.
to have very short	Consistently short battery life may indicate that replacement of the batteries is necessary.
battery life	Make sure the right batteries be used.

appears on the LCD.

To adjust the speakerphone volume, see par.

Adjusting Audio Volume.

4. Use	the	or	key to select a handset. If
you	select the current handset or a non-
existent handset, a warning tone will be heard.

return to MODIFY PIN menu.

5. Enter the new PIN, press the MENU/R key. You will

be requested to confirm the PIN code. Enter

handsets to the same base in order to share the same line with other people.

Before registering a handset to the base, you

Enter it then press the MENU/R key. If the PIN code

is correct, the Registration tone will sound and

then the base assigns a number to the handset,

otherwise a warning tone will sound, and then

Caller’s number	Make sure you have subscribed to a Caller ID service via your network provider.
	The caller may have withheld their details.
is not displayed
	Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.

￿ Flash Signal

When the line is engaged, pressing the MENU/R key	To use the said special services, just press the MENU/R
sends the Flash signal. This key is used in	key while the line is engaged: the display will show
conjunction with special services (e.g. call	R.
waiting) which can be available in your phone
network. For further details please contact your
network telephone company.

Advanced Functions

5. Press the MENU/R key to confirm, and the selected

handset will behave according to the

unregistered condition.

Flash Time

You can select to change the Flash time by the following steps:

1. Press the MENU/R key.
2. Press	or	key repeatedly to choose BS
SETTING menu, then press the MENU/R key.

the new PIN again then press the MENU/R key to

confirm and exit.

BS Reset

This function allows you to reset the Base setting to the factory default.

1. Press the MENU/R key.
2.	Press	or	key repeatedly to choose BS
	SETTING menu, then press the MENU/R key.
3.	Press	or	key to choose BS DEFAULT,
	press the	MENU/R	key. You will be prompted to

should press and hold the key on the bottom of the base for about 5 seconds then release it.

1.Press the MENU/R key.

2.Press or key repeatedly to choose REGISTER, then press the MENU/R key.

3.Use or key to scroll through the Base names list, press the MENU/R key to choose a base to your necessary. The handset will search for the requested base and the relevant information will flash on the LCD.

the handset returns to the previous

registration state.

5. If the base is not found, the handset will

behave according to the Out of Range

condition.

Technical Specifications

Frequency Range	1.88~1.90GHz
Channels	120 Duplex channels
Carrier Power	<250mW
Modulation	GFSK
Frequency Stability	< 50 KHz

￿Menu Map

3. Use	or	key to choose the FLASH TIME
menu. Press the MENU/R key.

enter the PIN code.

￿Calling with more than one Handset

Charging time 15 hours

1. CID BOOK	4. HS SETTING
	ALARM
2. PHONE BOOK	AUDIO SETUP
ADD ENTRY	RING SETUP
CHANGE ENTRY	TONE SETUP
DELETE ENTRY	LANGUAGE
DELETE ALL	HS LABEL
PB STATUS	AUTO ANSWER
	DATE & TIME
3. BS SETTING	SELECT BS
TERMINATE HS	HS DEFAULT
DIAL MODE

4. The display shows the current setting. Use the
or	key to select SHORT/LONG, press
the MENU/R key.

Modify PIN

This function allows you to change the PIN number of the currently active Base. The default PIN is 0000.

4. Enter the PIN code (the default PIN is 0000),

then press the MENU/R key. If the PIN code is

correct all base settings will be returned to

the factory default, otherwise the settings

will remain.

Result: After resetting, the handset will return to standby mode.

If you have more than one handset registered to the same base, you can make internal calls and transfer an external call between the registered handsets.

Making an internal call

1.Press the key, the LCD displays as follows, then enter the number of the handset you

want to call.

1. During an external call, press the		key then
enter the number of the handset you want to
transfer the call to.
2. If the called party can answer your call, he/she
can press the	key to talk with you. At this
time you can inform him/her of the incoming
call.
3. When the called handset answers, press the
key or replace	the handset to	the base to

Ambient temperature	Normal: 15 ~ 35 , Extreme: 0 ~ 40
Humidity	0%~90%
Dimensions (mm)	Base: 132.1 x 132.1 x 68.5; Handset: 159.3 x 48.4 x 28.9
Power Supply	Base input: 7.5V, 300mA; Handset input: Ni-MH 1.2V x 2, 600mAh

￿Design and specifications are subject to change without notice.

FLASH TIME	5. REGISTER
MODIFY PIN
BS DEFAULT

￿HS Settings

1 2 3 4 5

complete the transfer.

Setting up a 3-way conference call

If you subscribe to a DSL service

￿Phone Book

The phonebook built in your cordless phone allows you to store frequently used numbers so that you can easily make a call without having to remember or enter the phone number.

Character Map

To enter a specific alphanumeric character, press one or more times the relevant key for the required character according to the following table: once for the first character, twice for the second and so on.

Key	Characters in the displayed order
0	(spc)	0	&	/	.
1	_	1	@	_	?
2	A	b	C	2
3	d	E	F	3
4	G	H	I	4
5	J	K	L	5
6	M	N	O	6
7	P	q	R	S	7

Setting Alarm

You are able to set the alarm on the handset and adjust the alarm settings.

1.Press the MENU/R key.

2.Press or key repeatedly to choose HS SETTING menu, then press the MENU/R key.

3.Press the MENU/R key again to choose ALARM.

4.The display shows the current set. Use the

or key to select ON/OFF, press the

MENU/R key.

5. If you select ON, the display indicates you
to enter the time in HH:MM format.
6. Press the MENU/R key, a beep sounds and the
display shows SNOOZE ON/OFF, you can
press	or	key to enable or disable the
snooze	function on the alarm and press

2.Press or key repeatedly to choose HS SETTING menu, then press the MENU/R key.

3.Press the key to choose AUDIO SETUP, press the MENU/R key.

4.Use or key to choose SPEAKER VOL or EARPIECE V, press MENU/R key.

5.The display shows the current setting. Use the

or key to choose the volume level (VOLUME 1-VOLUME 5), press the MENU/R key.

Key Tone

Every time you press a key, your handset acknowledges it with a key tone. You can disable the key tones for a silent use. In certain error conditions, a warning tone will sound when an incorrect key is pressed.

1. Press the MENU/R key.
2. Press	or	key repeatedly to choose HS

2.If the handset entered is valid, the called handset will ring and display HSX CALLING.

The handset user can press the key to answer the internal call.

3.At the end of your conversation, press the key.

Note:

During the internal call, if an external call comes in, the LCD will show the caller's

number. You should press the key to end

the internal call first then press the key to answer the call.

Call transfer between handsets

You can transfer an external call between the handsets those are registered to the same base.

When you have both an external call and an intercom call in progress, you can set up a three- way conference call, like this:

1.During an external call, press the key and then the number of the handset you want to join the 3-way call.

2.The called party press key to answer.

3.The calling party can press the key to start the 3-way call.

4.Either of the two internal handsets can press

the key to leave the conference call at any time.

Note:

If one of the handsets drops the conference call, the remaining handsets will continue the conference.

Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

-Noise is heard during conversations.

-Caller ID features do not function properly.

To single-line telephone jack

Noise filter

Warranty and Ser vice Information

8	T	U	V	8
9	W	X	y	Z	9

the MENU/R key.

7. When the alarm sounds, press any key to

SETTING menu, then press the MENU/R key.
3. Use	or	key to choose TONE SETUP

￿Caller ID on call waiting

For Warranty and Product support contact Authorized SANYO DISTRIBUTOR

Alcom Electronics Pte Ltd - Singapore

Adding the Phone book Entries

1.Press the MENU/R key.

2.Press the key to choose PHONE BOOK, press the MENU/R key.

3.Press MENU/R key again to choose ADD ENTRY.

4.The display shows "NAME ?". Enter the name you want to use, then press the MENU/R key to confirm. The display shows "NUMBER ?". Enter the desired number (up to 20 digits), press the MENU/R key.

5.*Use or key to select the ring you like to associate with the number, press the MENU/R key to confirm.

6. Repeat if necessary.

*If you want to set a VIP number, you should select a special ring tone for it. The ring tone should be different from the external ring you have set. You can set up to 9 VIP ring tones associate with 9 VIP numbers/groups.

Note:

If you make a mistake while entering a name or a number, use the C/ key to correct it. Each time you press the key, the last character or digit is deleted.

switch it off.

Notes:

At step 5 you need to enter the time in 24-Hour format.

If you press any key at the right time the alarm to ring, the alarm will be silent.

If you choose SNOOZE ON, the alarm will ring at regular intervals of 10 minutes.

Audio Setup

You can also use the menu to adjust the audio volume.

1. Press the MENU/R key.

	menu, press the MENU/R key.
4.	Press the MENU/R key again to choose KEY TONE.
5.	You can use	or	key to choose ON or
	OFF to enable or disable the function.
6.	Press the MENU/R key.

Note:

For normal use, we recommend you leave the key tone enabled. This makes the phone easier to use.

When you subscribe to Call Waiting service from your local telephone company, the telephone will display the name and number of the second caller while you are having a conversation.

Caller ID info displayed	Caller two's information
	is displayed
Caller 1
4361234	Caller 1
	4	Caller 2
		2915678

1.When you are on the line, the telephone will automatically display the name and number of the second caller.

2.Press the MENU/R key to answer the second caller.

3.When you have finished, press the MENU/R key to continue with your conversation with the first caller.

Note:

If you have transferred an external call to another handset, you cannot use the call waiting function via the second handset.

Phone: (65) 68412668

Fax: (65) 68412628

Alcom Communications Sdn Bhd - Malaysia

Phone: (60) 3 7803 7676

Fax: (60) 3 7803 0660

Email: support@alcom.com.sg

Website: www.alcomonline.com

Due to continuous product development all features and specifications are subject to change without prior notice.