3.Attach the supplied UHF antennas to the BNC connectors on the front panel as shown in Figure 26. For best perfor- mance, orient the antennas with tips pointing away from each other at a 45° angle from vertical.
ATTACHING FRONT MOUNT ANTENNAS TO BNC CONNECTORS
FIGURE 26
Remote Antenna Installation
NOTE: The UA500 Remote Mount Antenna kit is sold separately.
1.Insert the two bulkhead adapters through the larger holes on each side of the front panel, and secure them from each side, using the supplied attaching hardware. See Figure 27.
2.Connect antenna cables to the receiver and the bulkhead adapters.
3.Attach Shure UA825 or UA850 low±loss antenna cable (RG±8 or equivalent) to the bulkhead adapters.
4.Connect Shure UA820A 1/2 wave antennas to the end of the antenna cables (adapter required).
5.Mount the antennas using the Shure UA500 mounting brackets. For best RF performance, do not use the supplied 1/4 wave antennas when remoting antennas. Use UA820A 1/2 wave antennas.
NOTE: For improved performance, use the optional UA830A Line Amplifier with UA845 Distribution Amplifier.
RECEIVER (TOP VIEW)
INSTALLING REMOTE ANTENNAS
FIGURE 27
± 17 ±