Call functions
Make a call
Number dialing
1.Enter the phone number, including the area code. For international calls, press * twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number.
2.To call the number, press the call key. To adjust the volume in a call, press the volume key up or down.
3.To end the call or to cancel the call attempt, press the end key.
You can search for a name or phone number that you have saved in Contacts. See "Search for a contact," p. 40. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name, and press the call key.
Dialing shortcuts
Assign a phone number to one of the number keys, 2 to 9. See "Dialing shortcuts," p. 41.
Call the number in one of the following ways: Press a number key, then the call key.
OR
If Speed dialling is set to On, press and hold a number key until the call begins.
Further details are described in Speed dialling. See "Call," p. 48.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list of the device.
Voice commands are
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.
1.In the standby mode, press and hold the right selection key or the volume down key. A short tone sounds, and Speak now is displayed.
2.Speak the name of the contact you want to dial clearly. If the voice recognition is successful, a list with matches is shown. The device plays the voice command of the first match on the list. If it is not the correct command, scroll to another entry.
Using voice commands to carry out a selected device |
|
function is similar to voice dialing. See "Voice |
|
commands," p. 45. | 25 |
|