Nokia 6500 Slide manual Set the time, zone, and date, Antenna, Configuration settings service

G e t s t a r t e d

When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Configuration"

p.37, and "Configuration settings service" p. 14.

on availability, contact your network operator, service provider, nearest authorised Nokia dealer, or visit the support area on the Nokia website, www.nokia-asia.com/ 6500slide/support.

When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed. Select Show > Save. If required, enter the PIN code supplied by the service provider.

Set the time, zone, and date
When you switch on your phone for the first time, and the
phone is in the standby mode, you are asked to set the time
and date. Fill in the fields, and select Save.
To access Date and time later, select Menu > Settings >
Date and time > Date & time settings, Date and time
format, or Auto-update of time (network service) to
change the time, time zone, and date settings.
Configuration settings service
To use some of the network services, such as mobile
internet services, MMS, Nokia Xpress audio messaging, or
remote internet server synchronisation, your phone needs
the correct configuration settings. For more information
14	Copyright © 2007 Nokia. All rights reserved.

Antenna

Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.