MAKE CALLS
After you have saved your calling card information in your phone, you can make a call using your calling card.
1At the start screen, select Menu > Settings > Call settings > Calling card.
2Enter your security code (the default security code is 12345) and press OK.
3Scroll to the calling card of your choice, select Options > Select > OK.
4Press the End key to return to the start screen; then enter the phone number, including any prefix (such as 0 or 1), that your calling card may require when you make a calling card call.
See your calling card for instructions.
5Press and hold the Talk key for a few seconds until Card call is displayed.
6When you hear the tone or system message, press OK.
Receive data or fax calls
Data or fax calls is a Network Service. See “Network services” on page 3 for more information.
If your wireless service provider supports this feature, then you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Note: For more information on connectivity, refer to the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia website at http://www.nokia.com/us.
1At the start screen, select Menu > Settings > Call settings > Data/fax calls > Incoming data/fax call > Normal, Data calls only, or Fax calls only and press Select:
2When you are finished receiving the fax or data call, repeat Step 1 and select Normal.
DATA TRANSFER
You can view the transmission speed when sending or receiving data or fax calls.
At the start screen, select Menu > Settings > Call settings > Data/fax calls > Data rate display > Graphic or Off and press Select.
54 | Copyright © 2004 Nokia |