O r g a n i z e r
■Calculator
The calculator in your device adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.
Note: This calculator has a limited accuracy and is designed for simple calculations.
1.In the standby mode, select Menu > Organizer > Calculator.
2.Enter the first number in the calculation. Press # for a decimal point if necessary. To perform a square or square root calculation, select Options > Square or Square root.
To cycle through the add (+), subtract
To change the sign, select Options > Change sign, or scroll up or down.
3.Enter the second number in your calculation.
4.Select Equals if calculation is complete or Options if more functions are required.
■Countdown timer
You can enter a specified time (up to 99 hours and 59 minutes). When the time runs out, your device sounds an alarm.
Note: The countdown timer only works when the device is on. Once you turn off your device, the timer is no longer active.
Set the countdown timer
1.In the standby mode, select Menu > Organizer > Countdown timer.
2.Enter the time (in hh:mm format), and select OK.
3.Enter a note for the timer, and select OK.
appears in the standby mode when the countdown timer is set. When the time runs out, your device sounds an alarm, displays the timer note, and flashes its lights.
Press any key during the alarm to stop the alarm. After 3 minutes the timer alert expires automatically.
Change the time
After you have set the timer, you can change the time.
1.In the standby mode, select Menu > Organizer > Countdown timer > Change time.
2.Enter the new time, and select OK.
3.Leave the note as it was, or enter a new note, and select OK.
79