Phone Book Access, Generic Audio/Video Distribution, Generic Access, and Generic Object Exchange. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.
Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.
Do not accept Bluetooth connections from sources you do not trust.
A Bluetooth connection is disconnected automatically after sending or receiving data.
Bluetooth connection settings
Select 
> Settings > Connectivity > Bluetooth.
Bluetooth — to switch Bluetooth connectivity on or off
My phone's visibility > Shown to all — to allow your device to be found by other devices with Bluetooth connectivity at all times. To allow your device to be found for a defined time period, select Define period. For security reasons it is advisable to use the Hidden setting whenever possible.
My phone's name — to define a name for your device
C o n n e c t i v i t y
Remote SIM mode > On — to enable another device, for example, a car kit, to use the SIM card of your device using Bluetooth technology (SIM access profile).
When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the lock code to unlock it first.
Send data
1Open the application where the item you want to send is saved.
2Scroll to the item you want to send, and select Options > Send > Via Bluetooth.
3The device starts to search for devices within range. Paired devices are shown with 
. Some devices may show only the unique device addresses. To find out the unique address of your device, enter the code *#2820# in the standby mode.
If you have searched for devices earlier, a list of devices found previously is shown. To start a new search, select More devices.
4Select the device with which you want to connect.