Nokia 6160 manual Storing codes, To Activate or Cancel, then press OK

Each time you use a feature that requires a feature code, that code is sent to the network to verify you’re using the correct feature code.

Note: If your phone has more than one phone number pro- grammed, any feature codes stored will apply only to your primary phone number, or NAM 1.

See “NAM selection” on page 44 for details on NAM.

Storing codes

1.Press Menu 4 4 5 (Settings - Network services - Network feature setting)

2.At Feature Code:, enter the feature code or deacti- vation code received from your dealer (e.g. ∗21∗,

#21#, etc.), press OK

3.W to the service that the code applies to and press

Select

4.W to suboption, then Select (Repeat step as required, based on number of suboptions)

(Use step four only for call forwarding options)

5.W to Activate or Cancel, then press OK

Network services

Some of the features in this menu are network services that require a subscription. See your service provider for details and availability.

4-4-1Voice privacy - See page 69.

4-4-2Call forwarding * - See page 21.

4-4-3Call waiting * - See page 24.

4-4-4Send own number * - See page 59.

4-4-5Network feature setting - See page 44.

4-4-6NAM selection - See page 43.

*These features will not appear in the menu unless they are activated using Network feature setting. See “Network fea- ture setting” on page 44 for details.

45