Nokia 6133b, 6126 manual Insert a microSD card, Remove the microSD card, Charge the battery

G e t s t a r t e d

■ Insert a microSD card

Keep all microSD memory cards out of the reach of small children.

Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards, but not all other brands may function correctly or be fully compatible with this device.

Use only compatible microSD cards with this device. Other memory cards, such as reduced-size multimedia cards, do not fit in the microSD card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

1. Remove the back cover of the phone.

2. Insert the card into the microSD card slot with the gold-colored contact surface facing down, and press it until it locks into place.

3. Close the back cover of the phone.

■Remove the microSD card

Important: Do not remove the microSD card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

You can remove or replace the microSD card during phone operation without switching the phone off.

1.Make sure that no application is accessing the microSD memory card.

2.Remove the back cover of the phone.

3.Press the microSD card slightly in to release the lock.

4.Remove the microSD card from the slot.

■Charge the battery

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3 or AC-4 charger.

13