Nokia 6120i owner manual Storing codes, Network services

Once you store the appropriate code in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate these services.

Each time you use a feature that requires a feature code, that code is sent to the network to verify you’re using the correct feature code.

Note: If your phone has more than one phone number programmed, any feature codes stored will apply only to your primary phone number, or NAM 1.

See “NAM selection” on page 46 for details on NAM.

Storing codes

1.Press Menu 4 5 7 (Settings - Network services - Network feature setting)

2.At Feature Code:, enter the feature code or deacti- vation code received from your dealer (e.g. ∗74, ∗740, etc.), press OK

3.W to the service that the code applies to and press

Select

4.W to suboption, then Select (Repeat step as required, based on number of suboptions)

(Use step four only for call forwarding options)

5.W to Activate or Cancel, then press OK

Network services

Some of the features in this menu are network services that require a subscription. See your service provider for details and availability.

4-5-1Digital/analog selection - See page 34.

4-5-2Public system selection - See page 55.

4-5-3Voice privacy - See page 72.

4-5-4Call forwarding * - See page 21.

4-5-5Call waiting * - See page 24.

4-5-6Send own number * - See page 63.

47