Nokia 2605 manual Change the default number, Set up phone numbers with pauses, Select Save

C o n t a c t s

3. Select SAVE.

You can also quickly create a contact in Standby Mode by entering the number and selecting Save > Add New Contact and follow the steps above. If no name is entered, the default phone number or email address is displayed in the Contact List.

Change the default number

The default number is the contact number that is called when you dial by contact name. To change the default number when multiple numbers are assigned to a single contact:

1.Select Contacts, then scroll to the contact you wish to modify, and press Edit.

2.Highlight the phone number you wish to set as the default number, and select Options > Set As Default > OK > Yes or No.

Set up phone numbers with pauses

Pause codes instruct the receiving system to pause or wait before entering the numbers that follow them in the dialing string. You can insert a wait or pause to separate additional digits (for example, a password or extension) from the main phone number.

To add a pause code to a new phone number in Standby Mode, do the following:

1.Enter the number. Select Options and one of the following:

2-Sec Pause — to set the device to pause for two seconds before dialing the secondary numbers. "P" appears in the dialing string. You can enter as many pauses as you need to accommodate the timing on automated answering services.

Wait — to set the phone to wait for you to send (or manually enter) the secondary numbers. "W" appears in the dialing string.

2.Enter additional number(s) and select Save.

45