Nokia 2180 manual Menu 3 7, Calling Card, To store a calling card

Menu 3 7, Calling Card

Making a calling card call is easy with this feature. However, you must first store your calling card information into your phone. Your phone can store up to four different calling cards.

Once the card’s information is stored

and selected with Menu 3 7, your phone will automatically use this card when you make calling card calls unless you select a different one.

To store a calling card

Once you press 0HQX 3 7, your phone lists &DUG $0' and 1RQH. Press W to select the card you want and press 2..

Enter your five-digit security code at the 6HFXULW\ &RGH: prompt, then press 2.. This gives you the 6(/(&7 ',$/0 ,1* 6(48(1&( screen. Press 6HOHFW and select the sequence your card uses. If you’re not sure which dialing sequence you should use, refer to the back of your calling card.

For example, if you must 1) dial the 1-800 access number, then 2) enter your calling card number and PIN, then 3) dial the phone number, then you must select that dialing se- quence (see chart) for your phone.

After you have selected the dialing sequence, you must store the information necessary for that dialing sequence, such as the access number, card number and PIN.

If you wish to store the name of the calling card, you must press ÷while $FFHVV QXPEHU= or &DUG QXPEHU= is displayed.

For more information on your phone’s security code, see “Security Features” on page 46.

27