Switch the device on
1Press and hold the power key.
2If the device asks for a (U)PIN code
or lock code, enter it, and press the left selection key. The factory setting for the lock code is 12345.
Your device has internal antennas.
Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise needed, and may reduce the battery life.
1Cellular antenna
2 Bluetooth technology/ wireless LAN antenna
3GPS receiver
Charge the battery
1Connect a compatible charger to a wall outlet.
2Connect the power cord to the device. If the battery is completely discharged, it may take a
while before the charging indicator starts scrolling.
3When the battery is fully
charged, the charging indicator stops scrolling. Disconnect the charger from the device, then from the wall outlet.
Tip: Disconnect the charger from the wall outlet when the charger is not in use. A charger that is connected to the outlet consumes power even when it is not connected to the device.
6