Nokia Complete Guide to Push to Talk Features on Devices

Show my PTT address—SelectIn 1 to 1 calls, In group calls, In all calls, or Never. Your service provider may have disabled some of these options in your device.

Show my login status—Select Yes if you want your status to be shown or No if you want your status to be hidden.

Select Connection settings, and enter the following information:

Domain—Enter the domain name obtained from your service provider.

Log in to push to talk
Press	, and select Connect. > Push to talk. Push to talk
automatically logs in to the service when started.
When log in is successful, push to talk automatically
connects to channels that were active when the
application was last closed. If the connection is lost, the
device automatically tries to log back in until you choose
to exit push to talk.

Connectivity

Access point name—Enter the push-to-talk access point name. The access point name is needed to establish a connection to the GSM/GPRS network.

Server address—Enter the IP address or domain name of the push-to-talk server obtained from your service provider.

User name—Enter your user name obtained from your service provider.

PTT password—Enter a password, if required, to make a data connection. The password is usually provided by the service provider and is often case-sensitive.

Exit push to talk
Press	, and select Connect. > Push to talk >
Options > Exit. Switch Push to talk off after exiting
application? is displayed. Select Yes to log out and close
the service. Select No if you want to keep the application
active in the background. If several applications are open
and you want to switch from one application to another,
press and hold		.
Make a one-to-one call
Select Options > PTT contacts.
Select the contact you want to talk to from the list and
select Options > Talk 1 to 1.
Press and hold		the entire time you are talking. When
you have finished talking, release			.

Copyright © 2006 Nokia. All rights reserved.

11