Philips 639 manual Select Profile, Connection, Press and hold 0to enter a dot «.», Security

Philips639_APMEA_CTA_GB.book Page 76 Saturday, February 28, 2004 2:40 PM

Select Profile

This menu allows you to select one of the available profiles, and to then define the connection settings for each of them: scroll +or -to choose the profile of your choice, then press <or >to select / deselect it and press ,to confirm.

All connection settings described below will apply to the selected profile, which you can then rename for easier identification.

Connection

Select connection

Allows you to select one of the data profiles you have defined in Settings > Access settings (see page 42 for detailed information on this subject).

In the list that appears, select the connection setting of your choice and press ,to confirm.

Bearer

Allows you to select the type of network used by the selected profile when launching a connection.

GSM or GPRS: your mobile will only use the GSM or the GPRS network for WAP connections.

GPRS first: your mobile will first try to connect to the GPRS network, then to the GSM network if the GPRS network isn’t available when connecting.

Selecting this option requires you to have configured both GSM and GPRS settings. See page 42 for details.

Proxy address

Allows you to specify a proxy gateway address to be used when launching a WAP connection using the selected profile. Press ,and enter the address of your choice, then press ,to confirm.

Press and hold 0to enter a dot «.»

Proxy port

Allows you to specify a proxy port number, in case the proxy you are using requires a different port number. Press ,and enter the number of your choice, then press ,to confirm.

Security

Certificates

Select this menu and press ,to display the list of installed security certificates. Select one of the items in the list and press ,to display its details or delete it.

Session info

Allows you to display information about the current WAP session: security type, class, etc. Press cto go back one page.

76 WAP