Boss Audio Systems CH3000D specification

To engineers in charge of repair or inspection of our products.

Before repair or inspection, make sure to follow the instructions so that customers and Engineers in charge of repair or inspection can avoid suffering any risk or injury.

1. Use specified parts.

The system uses parts with special safety features against fire and voltage. Use only parts with equivalent characteristics when replacing them. The use of unspecified parts shall be regarded as remodeling for which we shall not be liable. The onus of product liability (PL) shall not be our responsibility in cases where an accident or failure is as a result of unspecified parts being used.

2. Place the parts and wiring back in their original positions after replacement or re-wiring. For proper circuit construction, use of insulation tubes, bonding, gaps to PCB, etc, is involved. The wiring connection and routing to the PWB are specially planned using clamps to keep away from heated and high voltage parts. Ensure that they are placed back in their original positions after repair or inspection. If extended damage is caused due to negligence during repair, the legal responsibility shall be with the repairing company.

3.Check for safety after repair. Check that the screws, parts and wires are put back securely in their original position after repair. Ensure for safety reasons there is no possibility of secondary ploblems around the repaired spots. If extended damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company.

4.Caution in removal and making wiring connection to the parts for the automobile. Disconnect the battery terminal after turning the ignition key off. If wrong wiring connections are made with the battery connected, a short circuit and/or fire may occur. If extensive damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company.

5.Cautions regarding chips.

Do not reuse removed chips even when no abnormality is observed in their appearance. Always replace them with new ones. (The chip parts include resistors, capacitors, diodes, transistors, etc). The negative pole of tantalum capacitors is highly susceptible to heat, so use special care when replacing them and check the operation afterwards.

6. Cautions in handling flexible PCB

Before working with a soldering iron, make sure that the iron tip temperature is around 270... Take care not to apply the iron tip repeatedly(more than three times) to the same patterns. Also take care not to apply the tip with force.

7.Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

- 2 -

CH3000D specifications

The Boss Audio Systems CH3000D is a powerful monoblock amplifier designed for car audio enthusiasts who seek to enhance the bass performance in their vehicles. Known for its high output and reliability, the CH3000D captures the essence of strong sound quality combined with advanced technology features.

One of the standout features of the CH3000D is its impressive power output. With an RMS power rating of 1500 watts at 1 ohm, this amplifier delivers solid performance capable of driving subwoofers for deep, impactful bass. For those looking to maximize their audio experience, the peak power reaches up to 3000 watts, making it suitable for various bass-heavy genres of music.

The amplifier utilizes MOSFET technology, which ensures better efficiency and less heat generation compared to traditional bipolar transistors. This technology allows for better power management, translating to a longer lifespan and consistent performance. The CH3000D also includes a variable low-pass filter that allows users to adjust the frequency response, enabling customization according to individual preferences and subwoofer capabilities.

Additionally, the Boss CH3000D features a subsonic filter and bass boost, enhancing its flexibility for tuning. The subsonic filter allows users to eliminate unwanted low frequencies that can distort the sound, while the adjustable bass boost feature provides extra punch to the bass notes. These characteristics make it an excellent choice for those who want to tailor their sound system to achieve that perfect thumping bass line.

For installation, the CH3000D is designed with convenience in mind. It includes a wired remote control, allowing users to easily adjust the bass boost from the front seat without the need to reach for the amplifier itself. Its compact size makes it easier to fit into various vehicle types, ensuring that even those with limited space can enjoy powerful audio.

In summary, the Boss Audio Systems CH3000D provides car audio enthusiasts with an exceptional monoblock amplifier, marked by its powerful output, advanced MOSFET technology, and adjustable features. Whether you’re a casual listener or an audio aficionado, this amplifier promises to deliver a robust bass performance that will elevate your in-car listening experience to new heights.