Philips MT3120 user manual Set the country/language, Register your phone, Tap

Page 9
> [Services] > [Register], then to confirm.
to access the main menu screen.

Note

•• During normal use, it is not necessary to switch off the phone at any time. Switch the phone off only during extended period of non-use. In this case, time and date settings will be lost.

Configure your phone (country dependent)

When using your phone for the first time it will prompt you for initial setup information.

Set the country/language

Select your country/language, then tap to confirm.

»»The country/language setting is saved.

Note

•• The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country.Then you can set the date and time.

•• You can re-set the language later (see 'Set the display language' on page 18).

Register your phone

Your phone automatically asks you to register the phone with your original cordless phone's base station when you turn it on for the first time. If you skipped this step, refer to steps 1-3 below, otherwise continue after step 3.

1 Tap

2 Select

tap

3 Press the paging button on your original cordless phone's base station for approximately 10 seconds to set the base station of your phone to registration mode.

Note

•• Check in the user manual of your base station on how to enter the registration mode. For most base stations, this can be achieved by pressing the paging button for 5-10 seconds until you hear a confirmation signal.

•• The phone tries to connect to the base station with a series of standard passcodes automatically.

•• A successful registration is indicated by a sound signal in less than 30 seconds.

•• If your base station uses the passcodes/PIN different from the most common settings (e.g. 3456), you have to enter this PIN/passcode manually by following steps 4 to 6.

•• If you use a pin code with more than 4 digits, it cannot be entered through the handsfree phone. In this case, change your base stations pin code to a 4-digit pin code (e.g.0000) and then resume the registration process.

4 If your base station's passcode/PIN is not auto-recognized, enter the base station's passcode/PIN.

5 Select to make corrections.

6 Tap to confirm the passcodes/PIN.

»»When you see a confirmation message, registration is complete.

EN 7

Image 9
Contents Register your product and get support at Always there to help youPage Contents Text and number input tables To avoid damage or malfunction About operating and storage temperaturesOverview of the phone What is in the boxQuick start guide Loud speaker Touch sensitive LCD screen MicrophoneDisplay icons Main menu iconsIcon Descriptions Call Make or pick up a call Phonebook add, edit, view and delete phonebook entries etcGet started Switch on the handsfree phoneFix the lanyard to the phone Wear the phoneSet the country/language Register your phoneTap Check the battery level Charge the phoneSet the date and time Check the signal strength Standby modeMake a call CallsEnd a call Answer a callHeadphones mode Adjust the speaker volumeMute the microphone Silence the ringer for an incoming callEnter text and numbers Text and numbersView the phonebook PhonebookAdd a record Call from the phonebookDelete all records Delete a recordCall log Save a missed call number to the phonebookReturn a call Delete a call record Tap To access the option menu Select Delete all, then tapDelete all call records RequestsPhone SettingsAuto lock Set the key toneSet the display language Set backlight of the LCD screenServices AlarmRestore default settings Original factory settingsTap To confirm »»All settings are reset Technical data Grams 90 x 43.5 x 29.5 mm H x W x D Eco mode Yes RangePhonebook list with 20 entries Call log with 30 entries Declaration of conformity GAP standardCompliance with EMF Consequences for the environmental and human health Remove the integrated batteryHandset does not ring Frequently asked questionsText and number input tables Appendix26 EN Page 0979