Philips PSA[CD Features, Selecting a track and searching, Esp / power save mode, Resume and hold

features features

selecting a track and searching

selecting a track during playback

•briefly press 5 or 6 once or several times to skip to the current, previous or next track. y playback continues with the selected track,

and the track’s number is displayed.

selecting a track when playback is stopped

1briefly press 5 or 6 once or several times to

select the desired track. the track number is displayed.

2press 2; to start cd play.

y playback starts with the selected track.

searching for a passage during playback

1keep 5 or 6 pressed to find a particular passage in a backward or forward direction.

y searching starts while playback continues at low volume. after 2 seconds the search speeds up.

2release the button when you reach the desired passage. y playback continues from this position.

notes:

–if the player is in mode (see mode chapter), searching is not possible.

–in shuffle, shuffle repeat or repeat mode (see mode chapter), searching is only possible within the particular track.

esp / power save mode
with a conventional portable cd-player you might have experienced that
the music stopped e.g. when you were jogging. the electronic skip
protection (esp) prevents loss of sound caused by light vibrations and
shocks. continuous playback is ensured. however esp does not prevent
playback interruptions during vigorous running. it also does not protect		•
the unit against any damage caused by dropping!
on this set powersaving is default on. the power save mode helps to		•
extend battery lifetime for longer playback.
•	press esp (on the set only) to enter power save	•
	mode.
	ypowersave is displayed.
•	press esp again to return to esp mode.
	ypowersave disappears.	•
	esp on ➟ powersave ➟esp on
		•
		•
		•
		•
		•
		•
		•

selecting different playing possibilities-mode

it is possible to play tracks in random order, to repeat a single track or the entire cd, and to play the first few seconds of each track.

1press mode during playback as often as required in order to activate one of the following ‘modes’. the active mode is shown in the display.

y shuffle: all tracks of the cd are played in random order until all of them have been played once.

yshuffle repeat: all tracks of the cd are

played repeatedly in random order.

yrepeat : the entire cd is played repeatedly.

y : the first 10 seconds of each of the remaining tracks are played in sequence.

2 playback starts in the chosen mode after 2 seconds.

•to return to normal playback, press mode repeatedly until the display shows no active modes.

resume and hold

you can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (resume) and you can lock all buttons of the set so that no action will be executed (hold). use the off–resume–hold slider for these functions.

resume – continuing from where you have stopped

1 switch the slider to resume during playback to activate resume.

y resume is shown.

2 press 9 whenever you want to stop playback.

3 press 2; whenever you want to resume playback.

y resume is shown and playback continues from where you have stopped.

•to deactivate resume, switch the slider to off. y resume goes off.

hold – locking all buttons

you can lock the buttons of the set by switching the slider to hold. now, when a key is pressed, no action will be executed. this is of use, for example, when transporting the player in a bag. with hold activated, you can avoid accidental activation of other functions.

1 switch the slider to hold (or switch hold on the remote control) to activate hold.

yall buttons are locked is shown when

you press any button. indicator turns red and flashes. if the set is switched off, will be shown only when 2; is pressed.

2 to deactivate hold, switch the slider to off. (or switch hold on the remote control)

note: if you deactivate hold by switching the slider to resume, you will be activating the resume function.