Philips 288 manual Introduction, Before your first call, Symbols used in this guide, SIM card

Introduction

Thank you for purchasing your Philips Az@lis 288.

This guide will help you to learn easily and quickly how to use your phone.

Symbols used in this guide

Ringer volume A function displayed on your phone screen.

1Represents a key on your phone keypad. C < > o Represent a function on the compass key.

Long press: Press and hold the key for 2 seconds. Activate/deactivate Pressing the same key (called a toggle key) or using

</ > will alternate between different options:

ex. Activate and Deactivate.

Press M ->Settings ->Call settings ->Call forward

This represents a series of commands to tour the menu until you reach the specific function being discussed. The most important point to remember is the necessity to press o key AFTER EACH LEVEL before you can tour the next level. So, the above example is:

Press M->Settings o->Call settings o ->Call forward o

Read the safety instructions in the

Precautions section before use.

Before your first call

The SIM card

To use your phone, you must insert a valid SIM card for your GSM subscription.

This card contains your telephone number. It also has memory to store the phone numbers and messages you wish to retain. If you use this card on another phone, you still have the same phone number, stored numbers and messages.

PIN and PUK codes

The PIN code is a secret code in your SIM card to protect it from abusive use. If you or anyone else enters a wrong PIN code 3 times, your SIM card is blocked. To unblock it, you must request the PUK code from your Network Operator.

3