NEC 110 manual Changing the Battery Pack During a Call

Page 35

Using the MH 110 Wireless Telephone

2-11

Step 2 Slide the lip of the Battery Pack into the bottom of the cavity.

Step 3 Push the top of the Battery Pack until it snaps into place.

You should not have to force the Battery Pack into the Wireless Telephone.

NOTE

Changing the Battery Pack During a Call

The Battery Pack may be changed while a call is still in progress. Use the following steps to remove and replace the battery pack while in a call.

NOTE

If you are using the Telephony Gateway in your telephone system, do not press Power Off/End Call on the Wireless Telephone before beginning the following steps.

Step 1 Quickly remove the discharged Battery Pack and replace with a charged Battery Pack.

Refer to “Removing and Replacing the Battery Packs” on page 2-10for detailed instructions.

REFERENCE

Step 2 Press Power On/Start Call to turn the Wireless Telephone back on.

Step 3 Press Power On/Start Call again to resume the call in progress.

Users of IP telephony interfaces not requiring the UNIVERGE WL System Telephony Gateway should Park a call prior to changing the Battery Pack during an active call. The call should then be retrieved after the Battery Pack is replaced to rejoin the conversation.

Check with the switch administrator for instruction on how to perform this or a similar process on your particular telephone system.

REFERENCE

Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Mobile Handset Wireless Telephone Desktop Charger Page Please Note Liability DisclaimerRadio Frequency RF Information Page Electro Magnetic Interference/Compatibility Use While Driving IDA Specific Absorption Rate SAR Information MH110 Wireless TelephonesPage MH120 Page Page Page Contents Using the MH110 Desktop Charger Figures Page User Preferences Navigation Tools TablesPage Introduction Using this GuideDocument Conventions When you see It means ExampleWhen you see Page 1Mobile Handset 110 Wireless Telephone Using the MH 110 Wireless TelephoneMaking a Call Turning the Wireless Telephone On or OffAnswering a Call Activating System FeaturesDescriptions Display area Using the SoftkeysActivating Features With The Shortcut keys Status Indicators3Bottom of the MH110 Wireless Telephone Wireless Telephone HeadsetUser Option Menu Setting User PreferencesCommands Descriptions Actions Battery PacksLow Battery Indicator Removing and Replacing the Battery PacksChanging the Battery Pack During a Call Page Using the MH110 Desktop Charger Using the MH110 Desktop ChargerImportant Notice Cleaning the MH110 Desktop ChargerCleaning tips Care of the Wireless Telephone and ChargersPrecautions Usage Tips Care of the Wireless Telephone and Chargers Page Page NEC-9121, Revision
Top Page Image Contents