Starting the app for the first time | Panasonic KX-PR2110 KX-PRW120

Smartphone Connect Setup Guide

3Starting the app for the first time

After you have installed the Smartphone Connect app on your smartphone, you are ready to start the app and register your smartphone to the base unit. Use your smartphone to perform this step.

1.Make sure that your smartphone’s Wi-Fi feature is enabled and that your smartphone is connected to the same wireless network as your base unit.

2.Start the Smartphone Connect app by tapping its icon (shown here on the right).

3.When prompted to register your smartphone to the base unit, tap [Start].

R Illustrations shown here depict the Android version of the app.

Confirm

To begin registering this mobile phone to the base unit, tap "Start".

Cancel

Start

4. Wait for the registration process to be end.

R The app’s [Keypad] screen will be displayed.

RYou can confirm that your smartphone is connected to the

base unit. iPhone/iPad

Check the information in the Notifications Centre.

Android

Check that is displayed in the status bar and notifications panel.

Note:

RIn order to use most of the app’s features, your smartphone needs an active Wi-Fi connection. If your smartphone’s Wi-Fi feature is disabled, or if it is configured to suspend (sleep) its Wi-Fi connection to save power, you will not be able to make or answer calls.