Panasonic EB-GD50 operating instructions Call Divert

Menu Structures

All Calls displays the accumulated duration and call charge, if available, of incoming and outgoing calls. The lock code or PIN2 is required to reset the timer and call charge.

Call Waiting allows you to receive a second call during your current call. When updating or checking the status of call waiting the phone must be registered with a network.

Caller’s ID allows you to check the status of Caller’s Identification. The phone must be registered with a network.

Using Withhold ID it is possible to check if you send Caller’s Identification information when you make a call. When checking the Status of Withhold ID the phone must be registered with a network.

Call Charge will set the cost of each unit for call charge information and the required currency in which call charge is displayed.

Using Max Cost can restrict use of the phone to a specified number of units.

NOTE: The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. However, call charge information may not give an accurate reflection of the tariffs charged by your Service Provider.

Call Divert

Call Divert

B

Voice Calls

Fax Calls

Data Calls

Cancel All

Status

When Call Divert is enabled the divert icon (t) is displayed.

You can divert voice, fax and data calls using different circumstances and to different phone numbers.

When updating or checking the Status of Call Divert the phone must be registered with a network.

39