Sony LT26w manual Adding the geographical position to your photos, Using still camera settings

To take a self-portrait using the front camera

1Activate the camera.

2Tap the icon on the top left of the screen, then find and select Front camera.

3To take the photo, press the camera key. The photo is taken as soon as you release your finger.

To use the zoom function

•When the camera is open, press the volume key up or down to zoom in or out.

To use the still camera flash

1When the camera is open, press .

2Tap Flash, and select your desired flash setting.

3Take the photo.

To view your photos and videos

1Open the camera, then tap a thumbnail at the top right of the screen to open a photo or video.

2Flick left or right to view your photos and videos. Videos are identified by .

To delete a photo

1Open the photo that you want to delete.

2Tap an empty area of the screen to make appear.

3Tap .

4Tap OK to confirm.

Adding the geographical position to your photos

Turn on geotagging to add the approximate geographical location (a geotag) to photos when you take them. The geographical location is determined either by wireless networks (mobile or Wi-Fi® networks) or GPS technology.

When appears on the camera screen, geotagging is turned on but the geographical position has not been found. When appears, geotagging is turned on and the geographical location is available, so your photo can get geotagged. When neither of these two symbols appear, geotagging is turned off.

To turn on geotagging

1Activate the camera.

2Tap , then tap Geotagging > On.

3Tap OK to agree to enable GPS and/or wireless networks.

4Check the options that you want to select under Location services.

5After you confirm your settings, press to return to the camera screen.

6If appears on the camera screen, your location is available and your photo can get geotagged. If not, check your GPS and/or wireless network connection.

Using still camera settings

To select still camera settings

1From your Home screen, tap , then find and tap .

2To display all settings, press .

3Tap the setting you want to select.

To customize the still camera settings panel

1When the camera is open, tap to display all settings.

2Touch and hold the setting you want to move and drag it to the desired position.

If you drag the setting outside of the settings panel, the change is canceled.

67

This is an Internet version of this publication. © Print only for private use.