Important Information | Numark Industries PRO TT-1 guide

PRO TT-1

IMPORTANT INFORMATION...

Please read this entire manual before connecting the PRO TT-1to your system.

For optimum performance:

•Always make sure that AC power is OFF while making any connections.

•Do not force the platter to stop moving while the motor is engaged. Quality slipmats should be used to hold records in position. Forcing the motor to stop can damage the motor assembly.

•Never use spray cleaners or oils on the slide control. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment)

•Never attempt to make any adjustments or repairs other than those described in this manual. Take the PRO TT-1to your dealer or to an authorized Service Center.

•Do not place the unit in a location where it will be exposed to direct sun light or near a heating appliance.

•Do not place the unit in a location where there is high humidity or a lot of dust.

•Cartridge may pick up slight sound pressure or vibrations of the speakers coming along the floor or through the air resulting in howling. Find a location which is very stable and free of vibration.

•The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.

A NOTE ON CABLES:

Quality cable makes a big difference in audio fidelity and punch. See your

dealer or an electronics or

audio specialist store if you are not sure which cables to get.

GENERAL SYSTEM PRECAUTIONS

•Use appropriate cables throughout your system: Quality shielded audio cables and terminated shielded video cables, low-capacitance preferred. Speaker cables must be 14-gauge minimum; 12- or 10-gauge is better.

•Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers.

•Reliability will be enhanced through the use of banana connectors on the speaker wires. Observe correct speaker wire polarity. If in doubt, consult your dealer or a qualified technician.

•Take care to connect only one cable at a time. Pay attention to the color-coded, labelled Input and Output jacks.

•ALWAYS remember: “TURN AMPS O N LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which may cause severe speaker damage.

•Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier clipping.

•Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier distortion is THE major cause of speaker failure.

•To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or anything wet on top of the turntable!

- The Leader in DJ Technology

Industries

http://www.numark.com

PRO TT-1 specifications

Numark Industries is renowned for its innovative audio equipment, and the PRO TT-1 turntable is a testament to the company’s commitment to quality and performance. Designed specifically for vinyl enthusiasts and professional DJs, the PRO TT-1 seamlessly blends classic design with modern technology to meet the demands of today’s music landscape.

One of the standout features of the PRO TT-1 is its high-torque direct-drive motor, which ensures rapid start-up times and consistent rotational speed. This is crucial for DJs who rely on precise beat matching during live performances. The turntable supports both 33 1/3 and 45 RPM speeds, providing versatility for various vinyl formats.

The PRO TT-1 incorporates a heavy-weight aluminum platter which not only enhances stability but also minimizes vibration, ensuring a clean and accurate sound reproduction. Furthermore, the turntable is equipped with an adjustable counterweight and anti-skate control, allowing users to fine-tune the tracking force for optimal performance based on different cartridge types.

Numark has also integrated a built-in phono preamp into the PRO TT-1, making it a convenient choice for users who want to connect directly to standard audio equipment or recording devices without needing additional external gear. This feature opens up a world of possibilities for both recording and playback, making the turntable an ideal tool for home studios and live setups.

In addition to its technical prowess, the PRO TT-1 has a sleek, professional appearance that will complement any DJ setup. The robust construction ensures durability, making it a reliable choice for both home use and professional gigs.

Another noteworthy aspect is the USB output that allows users to digitize their vinyl collection quickly and easily. This feature is perfect for those wanting to preserve their analog music in a digital format, ensuring that classic tracks remain accessible in the modern music landscape.

Overall, the Numark PRO TT-1 combines robust engineering with user-friendly features, making it an excellent choice for vinyl lovers and professional DJs alike. With its blend of traditional craftsmanship and innovative technology, the PRO TT-1 stands out as a premier option in the world of turntables, ensuring that it will meet the needs of audiophiles and professionals for years to come.