Motorola NNTN8043-A Calls, Reset phone settings, Redial automatically, Turn off a call alert

Reset phone settings

Reset default settings for all options except lock code, security code, and lifetime timer.

Find it: > Settings > Phone > Security

1When prompted, enter the four-digit lock code (see page 9) and press Done.

2Scroll to Restore Phone and press .

3Confirm that you want to reset the phone by scrolling to Yes and pressing .

4When prompted, enter the four-digit lock code (see page 9) and press Done.

The screen does not change while the phone resets all options. After a few seconds, the phone turns off and then turns back on.

Calls

Redial

From the home screen, press to go to the All Calls

list. Scroll to a number, and press to call it. Press to view call details.

Note: The All Calls list includes numbers that were busy when you dialed.

Redial automatically

Note: Network/Service dependent.

When you make a call and hear a busy signal, your phone shows Call Failed, Number Busy.

You can set your phone to automatically redial busy numbers for four minutes. When the call connects, your phone rings or vibrates once, shows

Redial Successful, and completes the call.

Find it: > Settings > Call > Auto Retry > On or Off

When auto retry is turned off, you can manually activate the feature to redial a busy number. When you hear a fast busy signal and see Call Failed, press

or RETRY.

Turn off a call alert

To turn off the ringer for an incoming call, press the volume keys on the side of your phone.

Calls 15