Motorola NNTN8085A Connect new devices, Reconnect devices, Disconnect devices, Edit properties

Connect new devices

Note: This feature requires an optional accessory.

To connect with a new device, you need to pair with it. You only need to do this once for each device—to connect again, see “Reconnect devices” on page 40.

1Make sure the device you are pairing with is in discoverable mode.

Note: Refer to the guide that came with the device for details.

2Touch > Settings > Wireless controls > Bluetooth settings.

3Touch Bluetooth to turn on and scan. If Bluetooth is already on, touch Scan for devices.

4Touch a device to connect.

5If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the

device is connected, the Bluetooth indicator appears in the status bar.

Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.

Reconnect devices

To automatically reconnect your phone with a paired device, simply turn on the device.

To manually reconnect your phone with a paired device, touch the device name in the Bluetooth devices list.

Disconnect devices

To automatically disconnect your phone from a paired device, simply turn off the device.

To manually disconnect your phone from a paired

device, touch the device name in the devices list, then touch OK.

Edit properties

To edit the device name, touch > Settings > Wireless controls > Bluetooth settings > Device name. Enter a name and touch OK.

40Bluetooth™ wireless